433MHZ Remote Control Garage Gate Door Opener Remote Control Duplicator Clone Learning Rolling Code 4 Keys

Specific operation method:
1. The first step is to clear the code:
Press the two buttons on the upper row of the remote control at the same time. The indicator light will flash once and then flash quickly for about 2 seconds, which means the clearing is successful. After clearing, press the four buttons on the remote control. The indicator light will only flash once and then go out.
2. The second step of copying:
Place the original remote control and the copy remote control side by side (it is best to hold the original remote control in your right hand), and press any button on the two remote controls at the same time. If the indicator light of the copy remote control flashes quickly, the copy is successful. It only takes 1 second to copy successfully. Follow the same method in sequence to copy the other three buttons.
3. Recovery
If the use code is removed by mistake, you can press the two keys under the remote control at the same time before the other remote controls are not repaired.
Information before purchasing: Please pay attention to
1. This remote control is not a universal remote control. It can copy PT/HC2262, 2260, FP527, SMC918, PT2240 EV1527, some microcontroller chip remote controls and other chip remote controls. Common copy objects include electric vehicle remote controls, smart home remote controls, electric vehicle remote controls, etc. Door remote controls, garage door remote controls, retractable door remote controls, sliding door remote controls, barrier gate remote controls, rolling shutter door remote controls, remote controls used in alarms, various fixed codes, learning code remote controls, lighting remote controls, etc. .
2. Before matching the remote control, you must first confirm that your original remote control can be used normally. In addition, you need to know what the transmit frequency of the remote control is. Usually people don’t know what the transmit frequency of the remote control is. Please disassemble your remote control and refer to the picture above to know the remote control frequency and chip that need to be copied.