Sold out

Click to enlarge

433Mhz RF Remote Control Wireless Switch DC 12V, 24V, 36V, 10A, 1CH, RF Relay Receiver and 2CH Transmitter Kit For Intelligent Home

Price range: 9.12 $ through 14.58 $

Color
Ships From	CHINA Clear

Add to wishlist

SKU: 1005005997797567 Categories: Automation Kits, Consumer Electronics, Smart Electronics

Description

Remote programming

Working mode:

1. Inching mode: press the remote control the relay will connect, and then release the remote control to disconnect the relay;

2. Self-locking mode: press the remote control the relay will connect, and then press the remote control again to disconnect the relay;

3. Interlock mode: press the remote control key A to connect the relay, and press the remote control key B to disconnect relay.

4. Delay mode: press the remote control the relay will connect, release the remote control and start timing. After 5S, 10S and 15S (3 gears), the relay will be automatically closed.

Learning Methods:

1. Inching learning method:

Press the code pairing button on the control panel once, and the LED indicator will flash once. After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

2. Self-locking learning method:

Press the code pairing button on the control panel twice, and the LED indicator will flash twice. After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

3. Mutual lock learning method:

Press the code pairing button on the control panel three times, and the LED indicator will flash three times. After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

4. 5S delay learning method:

Press the code pairing button on the control panel four times, and the LED indicator will flash four times. After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

5. 10S delay learning method:

Press the code pairing button on the control panel five times, and the LED indicator will flash five times. After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

6. 15S delay learning method:

Press the code pairing button on the control panel six times, and the LED indicator will flash six times. After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

-Clearing the code :

Push the learning button on the receiver 8 times , the codes will be reset.

After clearing the code, remotes will be need to be recalibrated

Input Voltage: 12 V-36V , RF working mode: Superheterodyne

• Receiver sensitivity: > 97 dbm

• Transmitting distance:> 100 m ( open space)

• Decoding mode: MCU software decoding

• Remote storage: 250

• Support remote type: EV1527 learning code

• Working mode: Momentary, toggle, latching time delay (5s ,10s ,15s )

• Output terminal: NO , NC , COM

• Remote control battery: 2 x 3 V CR2016 button batteries

Note: Maximum input power is 250 V

10A relay with stable output and wide application

for Water Pump Motor LED/Electric Appliance

for Family, Farm, Factory, Office, Supermarket

for Garage, Light, Automated curtains, Fan, Door, Gate, LED, Lamps, Motor

Smart Home, Feel free to use it together

Learning Pair Code

it can work with any remote control with the same frequency, so you needn’t worry about losing remote

control any more.(if the remote control is lost, buy one and pair with the PCB board is Ok )

100m receiving distance

Powerful chip, the receiving distance can reach 100 meters

ABS high-temperature resistant shell, safer

Package including

**1Remote Control+1Receiver / Only 1Receiver / Only 1Remote Control**

(It depends on the model you choose)

Additional information

Weight	6 kg
Dimensions	6 cm
Support APP	No
Frequency	433 MHz
Channel	1
Package	No
Wireless Communication	RF
Use	Universal,Lighting,Electric Door,Automated curtains,SWITCH
Brand Name	kebidu
Origin	Mainland China
Certification	CE
Item Type	Switches
Switch Type	Remote Control
Model Number	12V 24V 36V receiver controller
Input voltage	12V-36V
Working current	10A
Remote Distance	above 100 m ( open space)
Support remote type	EV1527 learning code
Features 1	12v remote control relay
Features 2	24v receiver and transmitter kit
Features 3	relay receiver module 433 mhz for 12 v dc
Features 4	receiver and 2ch transmitter kit
Features 5	rf relay switch
Features 6	rf remote control wireless kit
Features 7	kit for intelligent home receiver
Features 8	receiver and 2ch transmitter home
Features 9	remote control switch 433mhz

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “433Mhz RF Remote Control Wireless Switch DC 12V, 24V, 36V, 10A, 1CH, RF Relay Receiver and 2CH Transmitter Kit For Intelligent Home”

You must be logged in to post a review.

Shipping & Delivery